|
|
| Suggested format for citation of papers in this volume: |
| List all author names: Title of article, in Surface Engineering 2004—Fundamentals and Applications, edited by Soumendra N. Basu, James E. Krzanowski, Joerg Patscheider, and Yury Gogotsi (Mater. Res. Soc. Symp. Proc. 843, Warrendale, PA , 2005), insert paper number. |
The Tribological Behavior of MoS2-Cr Films Sliding Against an Aluminum Counterface T0.0
James E. Krzanowski
Investigations of the Effect of (Cr1-x,Alx)N Coatings' Microstructure on Impact Toughness T1.2
K. Bobzin, E. Lugscheider , O. Knotek, and M. Maes
Diamondlike Carbon-Metal Nanocomposite Films for Medical Applications T1.4
R.J. Narayan, H. Abernathy, L. Riester, C.J. Berry, and and R. Brigmon
Hard PVD Coatings for Austenitic Stainless Steel Machining: New Developments T1.5
J.L. Endrino, A. Wachter, E. Kuhnt, T. Mettler, J. Neuhaus, and C. Gey
Effect of Surface Geometry on Stress Generation in Thermal Barrier Coatings During Plasma Spray Deposition T1.9
Guosheng Ye and Soumendra Basu
X-ray Studies of Near-Frictionless Carbon Films T2.7
Nikhil J Mehta, Sujoy Roy, Jacqueline Anne Johnson, John Woodford, Alexander Zinovev, Zahirul Islam, Ali Erdemir, Sunil Sinha, George Fenske, and Barton Prorok
Synthesis and Characterization of Nanocrystalline Diamond and Its Biomedical Application T2.8
Zhenqing Xu, Arun Kumar, Ashok Kumar, and Arun Sikder
Subcritical CO2 Assisted Polymer Surface Engineering at Low Temperatures T2.10
Yong Yang and Ly James Lee
Surface Nitridation of Amorphous Carbon by Nitrogen Ion Beam Irradiation T3.1
Chihiro Iwasaki, Masami Aono, Nobuaki Kitazawa, and Yoshihisa Watanabe
C, Si and Sn Implantation of CVD Diamond as a means of Enhancing Subsequent Etch Rate T3.2
P.W. Leech, T. Perova, R.A. Moore, G.K. Reeves, A.S. Holland , and M. Ridgway
Limiting Catalytic Coke Formation by the Application of Adherent SiC Coatings via Pulsed Laser Deposition to the Inner Diameter of Tube Material Traditionally Used for Ethylene Pyrolysis Service T3.4
Alok Chauhan, Wilton Moran, Elizabeth Casey, Weidong Si, and Henry White
Fabrication of Surface Nitridation Mask on GaAs Substrate for Nano-Lithography T3.5
Yo Yamamoto, Kohji Saito, Toshiyuki Kondo, Takahiro Maruyama, and Shigeya Naritsuka
Characterization of Nanocrystalline Surface Layer Induced by Shot Peening and Effect on Their Fatigue Strength T3.7
Hideo Mano, Kondo Satoru, Akihito Matsumuro, and Toru Imura
Comparison of Hardness Enhancement and Wear Mechanisms in Low Temperature Nitrided Austenitic and Martensitic Stainless Steel T3.9
S. Mändl, D. Manova, D. Hirsch, H. Neumann, and B. Rauschenbach
First-Principles Study of Mechanical Properties of Alumina-Copper Nano-Coating Interfaces T3.10
Shingo Tanaka, Rui Yang, and Masanori Kohyama
Double Interface Coatings on Silicon Carbide Fibers T3.11
Jun C. Nable, Shaneela Nosheen, Steven L. Suib, Francis S. Galasso, Michael A. Kmetz
Photochemical Adhesion of Fused Silica Glass Lens by Silicone Oil T3.15
Takayuki Funatsu, Masanori Kobayashi, Yoshiaki Okamoto, and Masataka Murahara
Real Time Measurement of Functional Groups Substitution on Fluorocarbon Surface by ATR FT-IR T3.16
Yuki Sato and Masataka Murahara
Comparison of -OH and -NH2 Functional Group Substitution on PTFE Surface With V-UV Photon Irradiation for Protein Adsorption T3.17
Yuji Sato, Naoki Kobayashi, and Masataka Murahara
Photochemical Deposition of Transparent Low Refractive Index SiO2 Topcoat for Laser Head at Room Temperature T3.18
Y. Tezuka and M. Murahara
Copper Pattern Formation on Fluorocarbon Film by Single Shot of ArF Laser T3.19
T. Mochizuki and M. Murahara
Photochemical Moisture Proof Coating on Nonlinear Optical Crystal by ArF Excimer Laser T3.20
M. Kojima and M. Murahara
Effects of High-Speed Deformation on the Phase Stability and Interdiffusion in Ultrasonically Joined Aluminum and Zinc Foils T3.22
Ibrahim Emre Gunduz, Emily D. Shattuck, Teiichi Ando, Peter Y. Wong, Charalabos C. Doumanidis
Improved Fatigue Properties of 316L Stainless Steel Using Glass-Forming Coatings T3.24
F.X. Liu, C.L. Chiang, L. Wu, Y.Y. Hsieh, W. Yuan, J.P. Chu, P.K. Liaw, C.R. Brooks, and R.A. Buchanan
Structural, Mechanical and Tribological Properties of TiN and CrN Films Deposited by Reactive Pulsed Laser Deposition T3.26
A.R. Phani and J.E. Krzanowski
The Use of Closely Spaced Vickers Indentations to Model Erosion of Polycrystalline alpha-Al2O3 T3.27
Adolfo Franco Júnior and Steve G. Roberts
Formation of High-Resistivity Silver-Silicon Dioxide Composite Thin Films Using Sputter Deposition T3.28
Ann Marie Shover, James M.E. Harper, Nicholas S. Dellas, and Warren J. MoberlyChan
A Surface Coating for Silicon Carbide Whiskers T3.32
Heng. Zhang, T.D. Xiao, D.E. Reisner, and P. Santiago
Adhesion Improvement of CVD Diamond Coatings on WC-Co Substrates for Machining Applications T3.33
Zhenqing Xu, Ashok Kumar, Leonid Lev, Michael Lukitsch, and Arun Sikder
High-Speed Processing With Reactive Cluster Ion Beams T3.36
Toshio Seki and Jiro Matsuo
Pseudomorphic Stabilization on Crystal Structure and Mechanical Properties of Nanocomposite Ti-Al-N Thin Films T3.38
A. Karimi, Th. Vasco, and A. Santana
Tribological Aspects of AlN-TiN Thin Composite Films T3.40
C. Waters, G. Young, S. Yarmolenko , X. Wang, and J. Sankar
Characterization of Electrochemically Activated Surface on Rolled Commercial AA8006 Aluminum T3.43
Yingda Yu, Øystein Sævik, Jan Halvor Nordlien, and Kemal Nisancioglu
Structural Nanocomposite Bonding Reinforced by Graphite Nanofibers With Surface Treatments T4.4
L. Roy Xu, Charles M. Lukehart, Lang Li, Sreeparna Sengupta, and Ping Wang
Tribological Applications of Shape Memory and Superelastic Effects T4.6
Wangyang Ni, Yang-Tse Cheng, and David S. Grummon
Control of Stress in Surface Engineered Silicon T4.8
Y. Ma, R. Job, B. Zölgert, W. Düngen, Y.L. Huang, and W.R. Fahrner
Buckling Failure of Compressive Loaded Hard Layers in Flexible Devices T4.9
Piet C.P. Bouten and Marcel A.J. van Gils
Simultaneous Effects on Topography, Composition and Texture in Ion Assisted Deposition of Thin Films T5.1
James M.E. Harper
On the Erosion of Material Surfaces caused by Electrical Plasma Discharging T5.4
Flavio A. Soldera and Frank Mücklich
Low Damage Smoothing of Magnetic Materials Using Oblique Irradiation of Gas Cluster Ion Beam T5.5
Shigeru Kakuta, Shinji Sasaki, Kenji Furusawa, Toshio Seki, Takaaki Aoki, and Jiro Matsuo
Molecular Dynamics Study of Suface Structure and Sputtering Process by Sequential Fluorine Cluster Impacts T5.7
Takaaki Aoki and Jiro Matsuo
Laser Induced Hierarchical Nano-Composites in Metallic Multi-Films: Structural Characterization T5.8
C. Daniel and F. Mücklich
Si(100) Nitridation by Remote Plasmas for Enhanced High-k Gate Performance T5.9
P. Chen and T.M. Klein
Nanoindentation of Ion Implanted and Deposited Amorphous Silicon T6.3/R10.3
J.S. Williams, B. Haberl, and J.E. Bradby
In-Situ Infrared (IR) Detection and Heating of the High Pressure Phase of Silicon During Scratching Test T6.5/R10.5
Lei Dong, John A. Patten, and Jimmie A. Miller
Micro-Raman Mapping and Analysis of Indentation-Induced Phase Transformations in Germanium T6.9/R10.9
Jae-il Jang, M.J. Lance, Songqing Wen, J.J. Huening, R.J. Nemanich, and G.M. Pharr
Mechanisms Underlying Hardness Numbers T6.11/R10.11
John J. Gilman
Synthesis and Characterization of Carbon Nitride Thin Film With Evidence of Nanodomes T7.3
S. Chowdhury and M. T. Laugier
Electron Microscopy Analysis on the Worn Surface of a High-Chromium White Iron During Dry Sliding Contact T7.4
A. Bedolla-Jacuinde and W.M. Rainforth
200 mm Silicon Wafer-to-Wafer Bonding With Thin Ti Layer Under BEOL-Compatible Process Conditions T7.5
J. Yu, J.J. McMahon, J.-Q. Lu, and R.J. Gutmann
Structural Factors Determining the Nanomechanical Performance of Transition Metal Nitride Films T7.8
K. Sarakinos, S. Kassavetis, P. Patsalas, and S. Logothetidis
|
