|
|
| Suggested format for citation of papers in this volume: |
| List all author names: Title of article, in Integrative and Interdisciplinary Aspects of Intermetallics , edited by Michael J. Mills, Haruyuki Inui, Helmut Clemens, and Chong-Long Fu (Mater. Res. Soc. Symp. Proc. 842, Warrendale, PA , 2005), insert paper number. |
Microstructure and Thermo-Mechanical Behavior of NiAl Coatings S1.3
G. Dehm, J. Riethmüller, P. Wellner, O. Kraft, H. Clemens, and E. Arzt
First-Principles Study of Structural and Defect Properties in FeCo Intermetallics S1.4
M. Krcmar, C.L. Fu, and J.R. Morris
Effect of Heat Treatments on Microstructure of Rapidly Solidified TiCo Ribbons S1.5
Kyosuke Yoshimi, Akira Yamauchi, Ryusuke Nakamura, Sadahiro Tsurekawa, and Shuji Hanada
Complex Intermetallic Compounds: Defects, Disordering, Details S1.6
W. Sprengel , F. Baier, K. Sato, X.Y. Zhang, and H.-E. Schaefer
Strengthening of Iron Aluminide Alloys for High-Temperature Applications S1.7
Martin Palm, André Schneider, Frank Stein, and Gerhard Sauthoff
Development of High Temperature Creep Resistance in Fe-Al Alloys S1.8
D.G. Morris, M.A. Muñoz-Morris, and C. Baudin
Pseudoelasticity of D03 Ordered Monocrystalline Fe3Al S1.9
S. Kabra, H. Bei, D.W. Brown, M.A.M. Bourke, and E.P. George
Effect of Alloying Elements (Ga, Ge, Si) on Pseudoelasticity in Fe3Al Single Crystals S1.10
Hiroyuki Y. Yasuda, Takashi Kase, and Yukichi Umakoshi
Quantitative Analysis of gamma Precipitates in Cyclically Deformed Ni3(Al,Ti) Single Crystals Using Magnetic Technique S2.3
Yukichi Umakoshi, Hiroyuki Y. Yasuda, and Toshifumi Yanai
Microstructures and Mechanical Properties in Ni3Si-Ni3Ti-Ni3Nb-Based Multi-Intermetallic Alloys S2.5
T. Takasugi, K. Ohira, and Y. Kaneno
Dislocation Structure, Phase Stability and Yield Stress Behavior of Ultra-High Temperature L12 Intermetallics: Combined First Principles-Peierls-Nabarro Approach S2.7
Oleg Y. Kontsevoi, Yuri N. Gornostyrev, and Arthur J. Freeman
Role of Microstructure in Promoting Fracture and Fatigue Resistance in Mo-Si-B Alloys S2.9
J.J. Kruzic, J.H. Schneibel, and R.O. Ritchie
The Effects of Substitutional Additions on Tensile Behavior of Nb-Silicide Based Composites S2.10
Laurent Cretegny, Bernard P. Bewlay, Ann M. Ritter, and Melvin R. Jackson
Microstructures of LENST Deposited Nb-Si Alloys S2.11
Ryan R. Dehoff, Peter M. Sarosi, Peter C. Collins, Hamish L. Fraser, and Michael J. Mills
Transformation Behavior of TiNiPt Thin Films Fabricated Using Melt Spinning Technique S3.2
Tomonari Inamura, Yohei Takahashi, Hideki Hosoda, Kenji Wakashima, Takeshi Nagase, Takayoshi Nakano, Yukichi Umakoshi, and Shuichi Miyazaki
Factors for Controlling Martensitic Transformation Temperature of TiNi Shape Memory Alloy by Addition of Ternary Elements S3.4
Hideki Hosoda, Kenji Wakashima, Shuichi Miyazaki, and Kanryu Inoue
Advanced TEM Investigations on Ni-Ti Shape Memory Material: Strain and Concentration Gradients Surrounding Ni4Ti3 Precipitates S3.6
Dominique Schryvers, Wim Tirry, and Zhiqing Yang
Shape Memory Effect Through L10-fcc Order-Disorder Transition S3.8
K. Tanaka
Coarsening Behavior and Coercivity in L10-Ordered Intermetallic Fe-Pd Ferromagnets with Equiaxed Grain Morphology S3.9
Jörg M.K. Wiezorek and Anirudha R. Deshpande
Comparison of Temperature Driven Ordering in Bulk Foil and Thin Film of L10 Ordered FePd S3.10
Chaisak Issro, Wolfgang Püschl, Wolfgang Pfeiler, Bogdan Sepiol, Peter F. Rogl, William A. Soffa, Manuel Acosta, and Véronique Pierron-Bohnes
Sub-Nano and Nano-Structures of Hydrides of LaNi5 and its Related Intermetallics S4.1
Etsuo Akiba, Kouji Sakaki, and Yumiko Nakanura
Characterization and Catalytic Properties of Ni3Al for Hydrogen Production From Methanol S4.2
Ya Xu, Satoshi Kameoka, Kyosuke Kishida, Masahiko Demura, An-pang Tsai, and Toshiyuki Hirano
Investigation of the Structure and Properties of Hypereutectic Ti-Based Bulk Alloys S4.3
Dmitri V. Louzguine-Luzgin, Larissa V. Louzguina-Luzgina, and Akihisa Inoue
In Situ Observation of Surface Relief Formation and Disappearance During Order-Disorder Transition of Equi-Atomic CuAu Alloy Using Laser Scanning Confocal Microscopy S4.4
Seiji Miura, Hiroyuki Okuno, Kenji Ohkubo, and Tetsuo Mohri
Directional Thermoelectric Performance of Ru2Si3 S4.6
Benjamin A. Simkin, Yoshinori Hayashi, and Haruyuki Inui
Mechanical Aspects of Structural Optimization in a Bi-Te Thermoelectric Module for Power Generation S4.7
Yujiro Nakatani, Reki Takaku, Takehisa Hino, Takahiko Shindo, and Yoshiyasu Itoh
Effects of Ga- and In-Doping on the Thermoelectric Properties in Ba-Ge Clathrate Compounds S4.8
Norihiko L. Okamoto and Haruyuki Inui
Magnetic Properties of E21-Base Co3AlC and the Correlation With the Ordering of Carbon Atoms and Vacancies S4.9
Yoshisato Kimura, Fu-Gao Wei, Hideyuki Ohtsuka, and Yoshinao Mishima
Atomic, Electronic, and Magnetic Structure of Iron-Based Sigma-Phases S4.10
Pavel A. Korzhavyi, Bo Sundman, Malin Selleby, and Börje Johansson
Effect of Heat Treatment Conditions on Multistage Martensitic Transformation in Aged Ni-rich Ti-Ni Alloys S5.1
Minoru Nishida, Toru Hara, Yasuhiro Morizono, Mitsuhiro Matsuda, and Kousuke Fujishima
Application of the CSL Model to Deformation Twin Boundary in B2 Type TiNi Compound S5.2
Minoru Nishida, Mituhiro Matsuda, Yasuhiro Morizono, Towako Fujimoto, and Hideharu Nakashima
Structural Properties and Magnetic Behavior in the Pseudobinary Alloys CoFe-CoAl S5.5
Nobutoshi Tadachi, Hiroki Ishibashi, and Mineo Kogachi
Formation of Defect Structures During Annealing of Cold-Deformed L10-Ordered Equiatomic FePd Intermetallics S5.6
Anirudha R. Deshpande and Jörg M.K. Wiezorek
Crystal Structure and Thermoelectric Properties of Al-Containing Re Silicides S5.7
Eiji Terada, Min-Wook Oh, Dang-Moon Wee, and Haruyuki Inui
Identification of the Chirality of Intermetallic Compounds by Electron Diffraction S5.8
S. Fujio, H. Sakamoto, K. Tanaka, and H. Inui
B2 Phases and Their Defect Structures: Part II. Ab Initio Vibrational and Electronic Free Energy in the Al-Ni-Pt-Ru System S5.13
Raymundo Arroyave, Sara Prins, and Zi-Kui Liu
B2 Phases and Their Defect Structures: Part I. Ab Initio Enthalpy of Formation and Enthalpy of Mixing in the Al-Ni-Pt-Ru System S5.14
Sara Prins, Raymundo Arroyave, Chao Jiang, and Zi-Kui Liu
Thermal Analysis of Relaxation Processes of Supersaturated Vacancies in B2-Type Aluminides S5.15
Ryusuke Nakamura, Kyosuke Yoshimi, Akira Yamauchi, and Shuji Hanada
Microstructure and Mechanical Properties of Fe-Ni-Mn-Al Alloys S5.17
M.W. Wittmann, I. Baker, J.A. Hanna, and P.R. Munroe
Thermomechanical Treatment of a Fe3Al Alloy S5.18
Joachim Konrad, Stefan Zaefferer, André Schneider, Georg Frommeyer, and Dierk Raabe
Optimization of Precipitation for the Development of Improved Wrought Fe3Al-Based Alloys S5.19
Satoru Kobayashi, Stefan Zaefferer, and André Schneider
Effect of Excess Vacancies on Antiphase Domain Growth in Fe3Al S5.20
Y. Koizumi, T. Hagiwara, Y. Minamino, and N. Tsuji
Microstructure, Mechanical Properties and Wear Resistance of Fe-Al Based Alloys With Various Alloying Elements S5.21
Han-Sol Kim, In-Dong Yeo, Tae-Yeub Ra, and Won-Yong Kim
Microstructures in Cold-Rolled Ni3Al Single Crystals S5.22
Kyosuke Kishida, Masahiko Demura, and Toshiyuki Hirano
Parameters of Dislocation Structure and Work Hardening of Ni3Ge S5.25
N.A. Koneva, Yu.V. Solov'eva, V.A. Starenchenko, and E.V. Kozlov
Crystal Structure, Phase Stability and Plastic Deformation Behavior of Ti-Rich Ni3(Ti,Nb) Single Crystals With Various Long-Period Ordered Structures S5.26
Koji Hagihara, Tetsunori Tanaka, Takayoshi Nakano, and Yukichi Umakoshi
Effect of Fe Alloying on the Vacancy Formation in Ni3Al S5.27
E. Partyka, R. Kozubski, W. Sprengel, and H.-E. Schaefer
Ab Initio Calculation of Point Defect Energies and Atom Migration Profiles in Varying Surroundings in L12-Ordered Intermetallic Compounds S5.28
Doris Vogtenhuber, Jana Houserova, Walter Wolf, Raimund Podloucky, Wolfgang Pfeiler, and Wolfgang Püschl
Experimental Investigation and Thermodynamic Modeling of Phase Equilibria in the Hf-Ti-Si System S5.30
Y. Yang, B.P. Bewlay, M.R. Jackson, and Y.A. Chang
Effect of Microstructure and Zr Addition on the Crystallographic Orientation Relationships Among Phases related to the Eutectoid Decomposition of Nb3Si in Near Eutectic Nb-Si Alloy S5.31
Seiji Miura, Kenji Ohkubo, and Tetsuo Mohri
High Temperature Oxidation Behavior of Al Added Mo/Mo5SiB2 In Situ Composites S5.34
Akira Yamauchi, Kyousuke Yoshimi, and Shuji Hanada
Nucleation of (Mo) Precipitates on Dislocations During Annealing of a Mo-Rich Mo5SiB2 Phase S5.35
Nobuaki Sekido, Ridwan Sakidja, and John H. Perepezko
Phase Equilibria and Lattice Parameters of Fe2Nb Laves Phase in Fe-Ni-Nb Ternary System at Elevated Temperatures S5.37
Masao Takeyama, Nobuyuki Gomi, Sumio Morita, and Takashi Matsuo
Sputtered Coatings Based on the Al2Au Phase S5.38
Christian Mitterer, Helmut Lenhart, Paul H. Mayrhofer, and Martin Kathrein
Compressive Creep Behavior in Coarse Grained Polycrystals of Ti3Al and Its Dependence on Binary Alloy Compositions S5.40
Tohru Takahashi, Yuki Sakaino, and Shunzi Song
High-Temperature Environmental Embrittlement of Thermomechanically Processed TiAl-Based Intermetallic Alloys With Various Kinds of Microstructures S5.45
T. Takasugi, Y. Hotta, S. Shibuya , Y. Kaneno, H. Inoue, and T. Tetsui
Abnormal Deformation Behavior in Polysynthetically-Twinned TiAl Crystals With A and N Orientations - An AFM Study S5.46
Yali Chen and David P. Pope
Experimental Studies and Thermodynamic Simulation of Phase Transformations in ?-TiAl Based Alloys S5.47
Harald F. Chladil, Helmut Clemens, Harald Leitner, Arno Bartels, Rainer Gerling, Wilfried T. Marketz, and Ernst Kozeschnik
Massive Transformation in High Niobium Containing TiAl-Alloys S5.48
A. Bartels, S. Bystrzanowski, H. Chladil, H. Leitner, H. Clemens, R. Gerling, and F.-P. Schimansky
The Creep Behaviors of Two Fine-Grained XD TiAl Alloys Produced by Similar Heat Treatments S5.50
Hanliang Zhu, Dongyi Seo, Kouichi Maruyama, and Peter Au
Phase Transformation in Orthorhombic Ti2AlNb Alloys Under Severe Deformation S5.51
B.A. Greenberg, N.V. Kazantseva, and V.P. Pilugin
Mechanical Behavior of a Pt-Cr Jewelry Alloy Hardened by Nano-Sized Ordered Particles S5.52
Kamili M. Jackson, Miyelani P. Nzula, Silethelwe Nxumalo, and Candace I. Lang
Rationalization of the Plastic Flow Behavior of Polysynthetically-Twinned (PST) TiAl Crystals Based on Slip Mode Observation Using AFM and Schmid's Law S6.5
Yali Chen and David P. Pope
The Correlation of Slip Between Adjacent Lamellae in TiAl S6.6
G. Molénat, A. Couret, M. Sundararaman, J.B. Singh, G. Saada, and P. Veyssière
A Study of the Deformation Behavior of Lamellar gamma-TiAl by Numeric Modeling S6.7
T. Schaden, F.D. Fischer, H. Clemens, F. Appel, and A. Bartels
Effect of B Addition on Thermal Stability of Lamellar Structure in Ti-47Al-2Cr-2Nb Alloys S6.8
Y. Yamamoto , N.D. Evans, P.J. Maziasz, and C.T. Liu
Fatigue Testing of Microsized Samples of gamma-TiAl Based Material S6.9
Timothy P. Halford, Kazuki Takashima, and Yakichi Higo
Texture Development During Hot Extrusion of a Gamma Titanium Aluminide Alloy S6.10
M. Oehring, F. Appel, H.-G. Brokmeier, and U. Lorenz On the Effects of Interstitial Elements on Microstructure and Properties of Ternary and Quaternary TiAl Based Alloys S6.11
Jean-Pierre Chevalier, Mélanie Lamirand, and Jean-Louis Bonnentien
An Electron Microscope Study of Mechanical Twinning in a Precipitation-Hardened TiAl Alloy S7.1
Fritz Appel
TEM Characterization of Fatigue Tested Lamellar Ti-44Al-8Nb-1B S7.2
H. Jiang, D. Hu, and I.P. Jones
Impact Properties of Hot-Worked Gamma Alloys With BCC ß-Ti Phase S7.3
Kentaro Shindo, Toshimitsu Tetsui, Toshiro Kobayashi, Shigeki Morita, Satoru Kobayashi, and Masao Takeyama
TEM Analysis of Long-Period Superstructures in TiAl Single Crystal With Composition Gradient S7.5
S. Hata, K. Shiraishi, N. Kuwano, M. Itakura, Y. Tomokiyo, T. Nakano, and Y. Umakoshi
Influence of Micro-Alloying on Oxidation Behavior of TiAl S7.7
Michiko Yoshihara and Shigeji Taniguchi
Creep of TiAl Alloys at 750°C Under Moderate Stress S7.8
Alain Couret and Joel Malaplate
Microstructure-Property Relationships of Two Ti2AlNb-Based Intermetallic Alloys: Ti-15Al-33Nb(at.%) and Ti-21Al-29Nb(at.%) S7.9
Christopher J. Cowen, Dingqiang Li, and Carl J. Boehlert
Increase in gamma/alpha 2 Lamellar Boundary Density and Its Effect on Creep Resistance of TiAl Alloy S7.10
Kouichi Maruyama, Jun Matsuda, and Hanliang Zhu
Effect of Long-Term Aging and Creep Exposure on the Microstructure of TiAl-Based Alloy for Industrial Applications S7.11
Juraj Lapin, Mohamed Nazmy, and Marc Staubli
Creep Behavior and Microstructural Stability of Ti-46Al-9Nb With Different Microstructures S7.12
S. Bystrzanowski, A. Bartels, H. Clemens, R. Gerling, F.-P. Schimansky, and G. Dehm
Internal Friction of a High-Nb Gamma-TiAl-Based Alloy With Different Microstructures S7.13
M. Weller, H. Clemens, G. Dehm, G. Haneczok, S. Bystrzanowski, A. Bartels, R. Gerling, and E. Arzt
|
