CC

SYMPOSIUM CC

Particulate Coatings - Synthesis, Characterization and Related Fundamental Phenomena

December 1 - 2, 1997

Chairs
Heinrich Hofmann Swiss Federal Inst of Technology
Robert Pfeffer New Jersey Inst of Technology
Mamoru Senna Keio Univ
Rajiv Singh Univ of Florida
Jorge Valdes Bell Labs, Lucent Technologies

Symposium Support

National Science Foundation
University of Florida

* Invited paper

SESSION CC1: PARTICULATE COATINGS:
FUNDAMENTAL PHENOMENA
Chair: Rajiv K. Singh
Monday Morning, December 1, 1997
Essex East (W)

8:30 AM *CC1.1
PARTICLE-PARTICLE INTERACTIONS WITH AND WITHOUT POLYMER COATINGS: Brij M. Moudgil , J. Adler, Y. Rabinovich, Materials Science and Engineering Department, University of Florida, Gainesville, FL; P. Somasundaran, Langmuir Center for Colloids and Interfaces, Columbia, University, New York, NY.

9:00 AM *CC1.2
EFFECTS OF ROUGHNESS AND MOLECULARLY THIN ORGANIC AND LIQUID LAYERS ON THE ADHESION AND FRICTION FORCES OF SURFACES. Jacob Israelachvili , Dept of Chemical Engineering, and Materials Dept, University of California, Santa Barbara, CA.

9:30 AM *CC1.3
INTERFACIAL CHARACTERISTICS OF NANOCOMPOSITE PARTICULATES. Krishna Rajan , Rensselaer Polytechnic Institute, Troy, NY; R.K. Singh, Univ of Florida, Gainsville, FL; P. Sajgalik, Slovak Academy of Sciences, Bratislava, SLOVAKIA.

10:00 AM BREAK

SESSION CC2: PARTICULATE COATINGS:
SYNTHESIS AND PROCESSING
Chairs: B. M. Moudgil and Robert Pfeffer
Monday Morning, December 1, 1997
Essex East (W)

{ 10:30 AM *CC2.1
ROLE OF PARTICLE COATINGS IN RECHARGEABLE BATTERIES. Deepika Singh , Energizer Power Systems, Gainesville, FL.

11:00 AM CC2.2
PREPARATION AND PROPERTIES OF PHENYTOIN SILICA COMPLEX NANOPARTICLES. Harumi Goto, Tetsuhiko Isobe, Mamoru Senna , Faculty of Science and Technology, Keio University, Hiyoshi, Yokohama, JAPAN.

11:15 AM CC2.3
MECHANICALLY ASSISTED SURFACE MODIFICATION OF POLYMER PARTICLES WITH SUPERFINE CALCIUM PHOSPHATES. Jiefan Liao , Nara Machinery Ltd., Tokyo, JAPAN.

11:30 AM CC2.4 SYNTHESIS OF ENGINEERED PARTICULATES BY DRY COATING TECHNIQUE. Ali Ata , Rajiv K. Singh and Yakov Rabinovich, Department of Materials Science & Engineering, University of Florida, Gainesville, FL.

SESSION CC3: NANOSTRUCTURED MATERIALS
Chairs: Heinrich Hofmann and Mamoru Senna
Monday Afternoon, December 1, 1997
Essex East (W)

1:30 PM *CC3.1
NANOPARTICULATE COATING OF FUNCTIONAL CERAMICS BY THE VAPOR PHASE REACTION. Masanobu Awano , Tetsuya Kameyama, Mutsuo Sando, Yoshitaka K uwahara, National Industrial Research Inst of Nagoya, Nagoya, JAPAN.

2:00 PM *CC3.2
NANOSTRUCTURED POWDERS: A NEW CLASS OF MATERIALS FOR FORMING HIGH PERFORMANCE PARTICULATE COATINGS. Ganesh Skandan , Nanopowder Enterprises Inc., Piscataway, NJ; Nick Glumac, Yijia Chen and Bernard H. Kear, Rutgers University, Piscataway, NJ..

2:30 PM CC3.3
NOVEL METHOD FOR THE SYNTHESIS OF ATOMIC THIN FILM COATINGS ON PARTICULATE MATERIALS. J. Fitz-Gerald , R.K. Singh, University of Florida, Department of Materials Science and Engineering, Gainesville, FL.

2:45 PM CC3.4
PROPERTIES AND MICROSTRUCTURE OF NANOSTRUCTURED SILICON. P.R.I. Cabarrocas (i), J. Dutta (ii), H. Hofmeister (iii) and H. Hofmann (ii); (i) Laboratoire de Physique des Interfaces et des Couches Minces, (UPR 258CNRS), Ecole Polytechnique, Palaiseau, FRANCE; (ii) Powder Technology Laboratory, Department of Materials Science, Swiss Federal Institute of Technology (EPFL), Lausanne, SWITZERLAND; (iii) Max-Planck-Inst of Microstructure Physics, Halle, GERMANY.

3:00 PM BREAK

3:30 PM *CC3.5
FABRICATION, SURFACE MODIFICATION AND PROCESSING OF NANOPOWDERS TO COATINGS AND THIN FOILS. Helmut Schmidt , Institut fuer Neue Materialien gem. GmbH, Saarbruecken, GERMANY.

4:00 PM *CC3.6
PREPARATION AND ELECTRONIC PROPERTIES OF MESOPOROUS OXIDE SEMICONDUCTORS. Michael Gratzel , EPFL Lausanne, Institut de Chemie Physique, Lausanne, SWITZERLAND.

4:30 PM CC3.7
NANOSTRUCTURED ZINC SULPHIDE PHOSPHORS. R. Vacassy , S.M. Scholz, C. Plummer, J. Dutta, H. Hofmann and M. Akinc, Powder Technology Laboratory (LTP), Dept. of Materials Science, Swiss Federal Institute of Technology (EPFL), Lausanne, SWITZERLAND; Polymer Laboratory (LP) Dept. of Materials Science, Swiss Federal Institute of Technology (EPFL), Lausanne, SWITZERLAND; Dept. of Materials Science Engineering, Iowa State University, Ames, IA.

4:45 PM CC3.8
NANOPARTICULATE FILM PRECURSORS TO CIS SOLAR CELLS: SPRAY DEPOSITION OF CU-IN-SE COLLOIDS. Douglas L. Schulz , Calvin J. Curtis, Rebecca A. Flitton, David S. Ginley, Center for Photovoltaic and Electronic Materials and Center for Basic Sciences, National Renewable Energy Laboratory, Golden, CO.

SESSION CC4: POSTER SESSION
Chairs: Heinrich Hofmann and Rajiv K. Singh
Monday Evening, December 1, 1997
8:00 P.M.
America Ballroom (W)

CC4.1
CONTROL OF PARTICLE COATING PROCESSES DUE TO NANO PARTICLES INTERLAYER COATINGS. Ali Ata , James Fitz-Gerald, Rajiv Singh, University of Florida, Department of Materials Science and Engineering, Gainesville, FL.

CC4.2
STUDIES ON SURFACE-PARTICLE INTERACTIONS IN THE CHEMICAL-MECHANICAL POLISHING PROCESS. U. Mahajan , J. Adler, R.K. Singh and B. Moudgil, Department of Materials Science and Engineering, University of Florida, Gainesville, FL.

CC4.3
LASER ASSISTED NANOSTRUCTURED COATING OF COLOSSAL MAGNETORESISTIVE LA-CA-MN-O SYSTEM ON MICRON SIZED PARTICLES. D. Kumar , J. Fitz-Gerald, R. Singh, University of Florida, Department of Materials Science and Engineering, Gainesville, FL.

CC4.4
CANTILEVER MOTION IN NON-CONTACT SCANNING FORCE MICROSCOPY. Fredy R. Zypman , Juan C. Merced, Idalia Ramos, University of Puerto Rico, PR; Carlos Negreira, Ramon Caraballo, Universidad de la Republica Oriental del Uruguay, URUGUAY.

CC4.5
ENERGY FILTERED IMAGING OF C THIN FILMS USING ELECTRON ENERGY-LOSS SPECTROMETER IN THE SCANNING TRANSMISSION ELECTRON MICROSCOPE. Dong Hyuk Shin , Dongguk University, Department of Physics, Seoul, KOREA.

CC4.6
MICROSTRUCTURAL

CHARACTERIZATION OF DIAMOND AND B-C-N FILMS PREPARED BY HOT-FILAMENT ASSISTED CHEMICAL VAPOR DEPOSITION. Max V. Sidorov , Center for Solid State Science, Arizona State University, Tempe, AZ; Zhiyong Y. Xie, J.H. Edgar, Department of Chemical Engineering, Kansas State University, Manhattan, KS; T.L. McCormick, Geo-Center, Fort Washington, MD.

CC4.7
ELECTROPLATED CU(SN)-ALO/TALC COMPOSITES FOR APPLICATION AS WEAR RESISTANT MATERIALS. Yang Cao , Department of Mining and Metallurgical Engineering, McGill University, Montreal, Quebec, CANADA; Yulin Wang, Naiqin Zhao, Shumei Zhao, Department of Materials Science and Engineering, Tianjin Uniersity, Tianjin, CHINA; J.A. Szpunar, Department of Mining and Metallurgical Engineering, McGill University, Montreal, Quebec, CANADA.

CC4.8
EFFECT OF LASER BEAM DIMENSION ON SUB-MICRON PARTICLES REMOVAL EFFICIENCY FROM SOLID SURFACES. S. Ivory D. Kumar, and Rajiv K. Singh, Department of Materials Science and Enginering, University of Florida, Gainesville, FL.

SESSION CC5: THICK FILMS AND PARTICLE BASED COATINGS
Chair: Helmut K. Schmidt
Tuesday Morning, December 2, 1997
Essex East (W)

8:30 AM *CC5.1
PARTICLE ASSISTED ENHANCED CHEMICAL VAPOR DEPOSITION OF DIAMOND FILMS. James H. Adair , Department of Materials Science and Engineering, University of Florida, Gainesville, FL.

9:00 AM CC5.2
CERAMIC MULTILAYERS FROM NANOSIZED PARTICLES USING LASER TECHNOLOGY. J.Th.M. De Hosson , M. de Haas, G. Krol. D. van Agterveld, A. Vreeling, Department of Applied Physics, University of Groningen, Groningen, NETHERLANDS.

9:15 AM CC5.3
BARIUM TITANATE/EPOXY NANOCOMPOSITE COATINGS FOR INTEGRATED CAPACITOR APPLICATIONS. Shurong Liang and Emmanuel P. Giannelis, Cornell University, Dept of Materials Science and Engineering, Ithaca, NY.

9:30 AM CC5.4
DEVELOPMENT AND CHARACTERIZATION OF TITANIA FILMS BY FLAME ASSISTED AEROSOL COATING TECHNIQUES. Guixiang Yang and Pratim Biswas, Aerosol & Air Quality Research Lab, Dept of Civil & Environmental Engineering, University of Cincinnati, Cincinnati, OH; Punit Boolchand, Dept of Electrical and Computer Engineering, University of Cincinnati, Cincinnati, OH; Ashok Sabata, Armco, Inc, Middletown, OH.

9:45 AM BREAK

SESSION CC6: PARTICLE ADHESION AND CLEANING
Chair: Jorge L. Valdes
Tuesday Morning, December 2, 1997
Essex East (W)

10:15 AM *CC6.1
THE FORCES BETWEEN PARTICLES AND SURFACES IN CHEMICAL MECHANICAL POLISHING EXPERIMENTS. Michael T. Dugger , Sandia National Laboratories, Albuquerque, NM.

10:45 AM *CC6.2
POST CMP CLEANING. Srini Raghavan , J.S. Jeon*, E.A. Kneer, Department of Materials Science and Engineering, University of Arizona, Tucson, AZ; *AMD, Sunnyvale, CA.

11:15 AM *CC6.3
THEORETICAL MODELING FOR LASER CLEANING OF MICRO-PARTICLES FROM SOLID SURFACE. Y.F. Lu , W.D. Song, M.H. Hong, D.S.H. Chan, T.S. Low, Department of Electrical Engineering and Data Storage Institute, National University of Singapore, SINGAPORE.

11:45 AM CC6.4
PAINT ADHESION OF METALLOCENE PLASTOMER BASED THERMOPLASTIC OLEFINS USED IN THE AUTOMOTIVE INDUSTRY. Michelle Mikulec , Ford Motor Company, Automotive Product Operations, Dearborn, MI; Thomas C. Yu, Exxon Chemical
Company, Polyethylene Technology, Baytown, TX.

The following exhibitors have identified their products and services as directly related to your research:

A N Corporation
Aldrich Chemical Company, Inc.
Amptek, Inc.
Blake Industries, Inc.
Chemglass, Inc.
Commonwealth Scientific Corporation
Evans East
E. A. Fischione Instruments, Inc.
Implant Sciences Corporation
Innovative Technology, Inc.
Instruments SA, Inc.
Osaka Vacuum, Ltd.
Osmic, Inc.
Park Scientific Instruments
Philips Analytical X-Ray
Philips Electron Optics Inc.
Physical Electronics, Inc.
Quesant Instrument Corporation
Rigaku/USA, Inc.
RJ Lee Instruments, Ltd.
Solartron Inc.
SOPRA, Inc.
South Bay Technology, Inc.
Struers/Logitech Product Group
TECHNOTRADE International, Inc.
Thermionics Laboratory, Inc.
TopoMetrix Corp.